argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
All-fluoropolymer cartridge for aggressive applications

The Fluoroflow® filter cartridge is our standard product for aggressive wet etch and clean applications. It provides good flow rates and on-stream life at an economical cost. The all-fluoropolymer construction provides excellent chemical resistance for the most aggressive applications up to 150ºC. It is available either ozone DI flushed and dried or wet-packed for quick installation.
Unit of Measure

Specifications

End Fittings

 N/A 226/Fin

Nominal Length

 N/A 20 in500 mm

Nominal Filter Rating

 N/A 100 µm

O-Rings Material

 N/A FEP-Encapsulated Silicone

Treatment Options

 N/A Ozone UPW Flush and Dry Ultraclean (Pre-Wet) UPW Flush and Dry Wet Packed

Materials of Construction

 N/A 100% Fluoropolymer construction

Effective Filtration Area per 10 inch (250 mm) Cartridge

 N/A 6.8 ft²0.63 m²
Metals Extractables1 N/A Standard: < 20ppb (total) Ultraclean: < 5ppb (total)

Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)

 N/A 80 psid5.5 bar

Maximum Forward Differential Pressure/Temperature @ 167ºF (75ºC)

 N/A 55 psid3.8 bar

Maximum Forward Differential Pressure/Temperature @ 257ºF (125ºC)

 N/A 30 psid2.0 bar

Maximum Forward Differential Pressure/Temperature @ 300ºF (150ºC)

 N/A 15 psid1.0 bar

Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)

 N/A 50 psid3.4 bar

Maximum Reverse Differential Pressure/Temperature @ 250ºF (121ºC)

 N/A 15 psid1.0 bar

Cleanliness (Particle Shedding)

 N/A Wet-packed < 2 particles/ml > 0.2µm after 7gal at 1gal/min

TOC/Resistivity Rinse-Up (Wet-Packed)

N/A TOC recovery within 3-5ppb of feed without additional rinse-up. Resistivity recovery within 0.4 megohm-cm of feed after 22gal @ 1gpm.

Benefits

N/A

  • Economical
  • Wet-pack option for quick installation
  • All-fluoropolymer for maximum chemical resistance
  • 100% integrity tested for consistent quality

    • Applications

    N/A

    • Wet etch and clean
      - Phosphoric acid
      - Sulfuric acid
      - Hydrofluoric acid
      - Nitric acid
      - Piranha
      - SC1, SC2
      - NMP-based solvents
    • Other high temperature or ozonated processes

    Technical Support and Product Information

    N/A Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.

    Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.

    Note

    N/A Specifications are subject to change without notification
    Fluoroflow is a registered trademark of Parker Hannifin Corporation.
    Viton and Kalrez are registered trademarks of E.I. DuPont de Nemours & Co., Inc.
    Chemraz is a registered trademark of Green, Tweed Inc.

    • 1 in a 10% HNO3 extraction