| Items |
 XPLT-GF-0.2-10-OEG-OEG XPleat™ GF Filters |
XPLT-GF-0.2-10-OEG-213 XPleat™ GF Filters |
XPLT-GF-0.2-10-OEG-FIN XPleat™ GF Filters |
XPLT-GF-0.2-10-OEG-FLT XPleat™ GF Filters |
XPLT-GF-0.2-10-213-OEG XPleat™ GF Filters |
|||||
| Type | XPLT | |||||||||
| Membrane/Media | GF | |||||||||
| Nominal Micron Rating | 0.2 µm | |||||||||
| Absolute Micron Rating | 1.0 µm | |||||||||
| Length | 10 in25.4 cm | |||||||||
| End #1 Adapter | Open End Gasket | Open End Gasket | Open End Gasket | Open End Gasket | 213 O-Ring | |||||
| End #2 Adapter | Open End Gasket | 213 O-Ring | Fin Adapter | FLT | Open End Gasket | |||||
| Elastomer Material1 | Buna-N EPDM Silicone Viton | |||||||||
| Filter Media Material | Glass Microfiber | |||||||||
| Media Support Material | Polyester | |||||||||
| Components | Polypropylene | |||||||||
| Sealing | Thermal Bonding | |||||||||
| O-Rings/Gaskets2 | Buna EPDM Silicone Viton | |||||||||
| Outside Diameter | 2.75 in70 mm | |||||||||
| Inside Diameter | 1.25 in31 mm | |||||||||
| Effective Filtration Area | 9 ft²1 m² | |||||||||
| Maximum Forward Differential Pressure | 60 psid4.14 bar | |||||||||
| Maximum Reverse Differential Pressure | 30 psid2.07 bar | |||||||||
| Maximum Operating Temperature at 10 psi (0.69 bar) in Water | 180 ºF82 ºC | |||||||||
| Note |
XPleat is available in case quantities only. XPleat part numbers reflect case quantities of six (6). Trademark of General Electric Company; may be registered in one or more countries. |
|||||||||
| Typical Applications |
|
|||||||||
| General Properties | XPleat GF filters are available in nominal and absolute micron ratings (Figure 1). The nominal micron ratings are: 0.2, 0.45, 1.0, 3.0 and 10.0 µm. The absolute micron ratings are 1.0, 2.0, 4.0, 8.0 and 15.0 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance. | |||||||||
| Additional Information |
|
|||||||||
|
||||||||||
