argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Polypropylene Depth Media Filter Cartridges Engineered and Manufactured for Maximum Efficiency and Value

GPD grade Polypropylene cartridges are designed for general purpose use wherever a cost effective pleated depth filter is required. Rated at 99.9% efficiencies at the rated pore size and designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, GPD filters lower the cost of filtration. GPD cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. These cartridge modules are also individually tested. Priced below special purpose cartridges, GPD cartridges are still manufactured with the same careful attention to both quality and performance.
Unit of Measure

Specifications

Pore size

N/A 0.22 µm

316 SS Ring

N/A Ring

Cartridge Length

N/A 9.75 in24.6 cm

End Caps

N/A 020 O-ring / Plug 213/119 Internal O-ring / Plug 213/119 Internal O-ring DOE 2-222 O-ring / Flat 2-222 O-ring / Plug 2-222 O-ring / Spear 2-222 O-ring 3 Tab / Flat 2-222 O-ring 3 Tab / Spear 2-223 O-ring / Flat 2-223 O-ring / Spear 2-226 O-ring / Flat 2-226 O-ring / Spear Flat Gasket / Plug Flat Gasket, DOE

Flow Rate

N/A 3.0 gpm11.35 lpm

Construction Materials

Filtration Media

N/A Polypropylene

Filtration Media Support Material

N/A Polypropylene

End Caps Material

N/A Polypropylene

Center Core Material

N/A Polypropylene

Outer Support Cage Material

N/A Polypropylene

Sealing Method

N/A Thermal Bonding

O-Rings Material

N/A Buna EP PTFE® Encapsulated Silicone PTFE® Encapsulated Viton® Silicone Viton®

Note

N/A All materials of construction are FDA accepted. Final assemblies have been validated to pass USP class 6 Toxicology extractable tests, oxidizable substances for plastics, endotoxin level and other quality tests.

Maximum Operating Parameters

Forward Differential Pressure at 20ºC

N/A 50 psi3.4 bar

Reverse Differential Pressure at 20ºC

N/A 40 psi2.7 bar

Operating Temperature at 10 psid (0.69 bar) in Water

N/A 180 ºF82 ºC

Recommended Change Out Pressure

N/A 35 psid2.4 bar

Dimensions

Nominal Length

N/A 5 to 40 in12.7 to 101.6 cm

Nominal Outside Diameter

N/A 2.75 in7.0 cm

Filtration Area Per 10" Length

N/A Upto to 7.2 ft²0.67 m²

Sanitization / Sterilization

Filtered Hot Water

N/A 194 ºF90 ºC

Autoclave

N/A 250ºF (121ºC), 30 min, multiple cycles

In-Line Steam

N/A 275ºF (135ºC), 30 min, multiple cycles

Chemical Sanitization

N/A Industry standard concentrations of hydrogen peroxide, paracetic acid, sodium hypochlorite and other selected chemicals. Sanitization protocols designed to extend the useful life of GPD cartridges are available from Critical Process Filtration, Inc.

Applications

N/A Filtration of:

  • Wine Clarification
  • Beverage Clarification
  • Cosmetics
  • Chemicals
  • Soft Drinks
  • Bottled Water
  • Process Water
  • Air & Gases

Flow Rate

N/A See the Flow Rate table in more image which represents typical water flow at a one psi (69 mbar) pressure differential across a single 10-inch cartridge element. The test fluid is water at ambient temperature. Extrapolation for housings with multiple elements and higher pressure drops is acceptable, but as flows increase the pressure drop of the housing becomes more apparent.

Integrity Test Information

N/A Cartridges are factory tested for integrity before shipment. Field Duplication of these tests is not practical because of the complexity of the testing process and absence of commercial portable testing equipment.

Quality Standards

N/A Our goal is to ensure our customers the greatest possible value for their filtration dollar. We achieve both low cost manufacture and high quality by employing state of the art manufacturing equipment. This computer-controlled equipment is highly automated, reducing hand operations that compromise quality. Each operation, including assembly, testing, cleaning, drying and packaging, is done in appropriately rated clean rooms. Critical Process Filtration manages an ISO 9000 facility that produces validated products to rigorous standards. Manufacturing is controlled using sophisticated MRP software that is networked to work stations in manufacturing centers and inspection points. During the manufacturing and inspection processes, data is collected "real time" from machinery and measuring instruments. This allows variable and attribute data to be quickly and easily analyzed to facilitate constant improvements in both quality and cost.

Total Performance

N/A Critical Process Filtration, Inc. is a vertically integrated supplier of filtration products and services to industries in which filtration is considered to be a critical part of the manufacturing process. We manufacture a complete line of products to help you achieve all your filtration requirements from a single source.