argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Pleated polypropylene absolute-rated depth cartridges with superior dirt-holding capacity

Polyflow®'s random fiber polypropylene depth media provides long on-stream life and high retention efficiencies. While many polypropylene depth media are nominally rated and cannot meet their actual claimed retention efficiency, Polyflow® is engineered to meet exacting performance claims.

Parker's innovative research team developed an exclusive calendaring process that produces media with unsurpassed dirt-loading capacity. Before each lot of media is fabricated, the best calendaring conditions are determined to ensure minimal lot-to-lot variability and peak product performance. The number of pleats for each filter rating has also been optimized to ensure maximum dirt-loading capacity and on-stream life.

Polyflow® is thermally bonded from 100% virgin polypropylene to ensure superior cleanliness and excellent chemical and thermal compatibility under harsh processing conditions.
Unit of Measure

Specifications

Filter Rating

 N/A 0.6 µm1.2 µm2.5 µm5.0 µm10.0 µm20.0 µm40.0 µm

Insert Style

 N/A None (STD)

End Fittings

 N/A 020/Internal/Flat

Nominal Length

 N/A 5 in125 mm

Gasket/O-Ring Material

 N/A Buna N EPDM FEP Encapsulated Silicone (O-Rings only) FEP Encapsulated Viton® (O-Rings only) None Silicone Viton®

Thickness (Gaskets only)

 N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket

Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)

 N/A 80 psid5.5 bar

Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)

 N/A 40 psid2.8 bar

Maximum Reverse Differential Pressure/Temperature @ 140ºF (60ºC)

 N/A 15 psid1.0 bar

Effective Filtration Area per 5 inch (130 mm) Cartridge

 N/A 2.4 ft²0.22 m²

Effective Filtration Area per 10 inch (250 mm) Cartridge

 N/A 4.9 ft²0.46 m²

Filtration Ratings

 N/A The 0.6 µm offers typical retention up to 99% efficiency. 1.2 µm, 2.5 µm, 5 µm, 10µm, 20 µm, and 40 µm are up to 99.9% efficient at specified pore size

Filtration Cleanliness

 N/A Cartridge extractables NVR < 35 mg per 10 inch (250 mm) cartridge

Maximum Operating Temperature

 N/A 160 ºF71 ºC
Typical Water Flow Rates1 N/A 0.6 µm - 4.2 gpm/psid (23.3 lpm/100 mbar) 1.2 µm - 5.0 gpm/psid (27.4 lpm/100 mbar) 2.5 µm - 13.5 gpm/psid (74.1 lpm/100 mbar) 5.0 µm - 26.0 gpm/psid (142.7 lpm/100 mbar) 10.0 µm - 40.0 gpm/psid (219.6 lpm/100 mbar) 20.0 µm - 50.0 gpm/psid (274.4 lpm/100 mbar) 40.0 µm - 60.0 gpm/psid (329.3 lpm/100 mbar)

Materials of Construction

Depth Media Material

 N/A Polypropylene

Support Layers

 N/A Polypropylene

Structure

 N/A Polypropylene

Benefits

N/A

  • Low extractables
  • Absolute particle retention provides excellent protection for downstream filters
  • Broad chemical compatibility allows use in most applications
  • High flow rate, long service life reduces processing time

    • Applications

    N/A

  • General water filtration
  • Beverage/wine clarification
  • RO/DI prefiltration
  • Waste water

    • Steam Sterilizable and Sanitizable

    N/A Cartridges can be steam sterilized for multiple cycles at 266ºF (130ºC) or sanitized for at least ten 30-minute cycles with 176ºF (80ºC) water. They are compatible with most sanitizing agents.

    Technical Support and Product Information

    N/A Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.

    Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.

    Note

    N/A Specifications are subject to change without notification
    Polyflow® is a registered trademark of Parker Hannifin Corporation.
    Viton® is registered trademark of E.I. DuPont de Nemours & Co., Inc.
    Cuno® is a registered trademark of Cuno Inc.

    • 1 Per 10-inch (250 mm) cartridge equivalent and for fluids with viscosity of 1cP