argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
PTFE Membrane Media Filter Cartridges Engineered and Manufactured for Cost Effective Filtration

GTM grade PTFE cartridges are designed for general purpose use wherever a cost effective PTFE membrane filter is required. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent filters. These cartridges are found in the manufacturing processes of pharmaceutical companies, semi-conductor manufacturers and bulk chemical companies. The cartridge surface area, filter core design, pleat configuration and pleat packing density have been optimized to provide increased cartridge life resulting in lower filtration operating costs. Each cartridge module is integrity tested.
GTM Grade PTFE Cartridges
Unit of Measure
Items GTM Grade PTFE Cartridges
GTM*10S00005
GTM Grade PTFE Cartridges
GTM Grade PTFE Cartridges
GTM*10S00097
GTM Grade PTFE Cartridges
GTM Grade PTFE Cartridges
GTM*10S00001
GTM Grade PTFE Cartridges
GTM Grade PTFE Cartridges
GTM*10S00019
GTM Grade PTFE Cartridges
GTM Grade PTFE Cartridges
GTM*10S00002
GTM Grade PTFE Cartridges
Pore size N/A 0.10 µm
316 SS Ring N/A Ring
Cartridge Length N/A 4.875 in12.4 cm N/A 9.75 in24.6 cm N/A 10 in25.4 cm N/A 19.5 in49.5 cm N/A 20 in50.8 cm
End Caps N/A 020 O-ring / Plug 213/119 Internal O-ring / Plug 213/119 Internal O-ring DOE 2-222 O-ring / Flat 2-222 O-ring / Plug 2-222 O-ring / Spear 2-222 O-ring 3 Tab / Flat 2-222 O-ring 3 Tab / Spear 2-223 O-ring / Flat 2-223 O-ring / Spear 2-226 O-ring / Flat 2-226 O-ring / Spear Flat Gasket / Plug Flat Gasket, DOE
Flow Rate N/A >26 SCFM/psid/10 inch cartridge length 1.25 gpm/psid/10 inch cartridge length
Filtration Media N/A PTFE
Filtration Media Support Material N/A Polypropylene
End Caps Material N/A Polypropylene
Center Core Material N/A Polypropylene
Outer Support Cage Material N/A Polypropylene
Sealing Method N/A Thermal Bonding
O-Rings Material N/A Buna EP PTFE® Encapsulated Silicone PTFE® Encapsulated Viton® Silicone Viton®
Note N/A All materials of construction are FDA accepted. Final assemblies have been validated to pass USP class 6 Toxicology extractable tests, oxidizable substances for plastics, endotoxin level and other quality tests.
Forward Differential Pressure at 20ºC N/A 50 psi3.4 bar
Reverse Differential Pressure at 20ºC N/A 40 psi2.7 bar
Operating Temperature at 10 psid (0.69 bar) in Water N/A 180 ºF82 ºC
Nominal Length N/A 5 to 40 in12.7 to 101.6 cm
Nominal Outside Diameter N/A 2.75 in7.0 cm
Filtration Area Per 10" Length N/A 7.0 ft²0.65 m²
Filtered Hot Water N/A 194 ºF90 ºC
Autoclave N/A 250ºF (121ºC), 30 min, multiple cycles
In-Line Steam N/A 275ºF (135ºC), 30 min, multiple cycles
Chemical Sanitization N/A Industry standard concentrations of hydrogen peroxide, paracetic acid, sodium hypochlorite and other selected chemicals. Sanitization protocols designed to extend the useful life of GTM cartridges are available from Critical Process Filtration, Inc.®.
Bubble Point1 N/A 22 psig
Applications N/A Final Filtration of:
  • Compressed Air
  • Solvents
  • Pressurized Gases
  • Tank Ventilation
Flow Rate N/A See the Flow Rate table in more image which represents typical water flow and air flow rates. These values are approximations because of the differences in pressure drop encountered in housings and piping systems. Extrapolation to multiple length cartridges in multi-round housings can be done for sizing purposes. Exact flow rates will be installation dependent.
Quality Standards N/A Our goal is to ensure our customers the greatest possible value for their filtration dollar. We equipment is highly automated, reducing hand operations that achieve both low cost manufacture and high quality by employing state of the art manufacturing equipment. This computer controlled compromise quality. Each operation including assembly, testing, cleaning, drying and packaging is done in appropriately rated clean rooms. Critical Process Filtration manages an ISO 9000 facility that produces validated products to rigorous standards. Manufacturing is controlled using sophisticated MRP software that is networked to work stations in manufacturing centers and inspection points. During the manufacturing and inspection processes, data is collected "real time" from machinery and measuring instruments. This allows variable and attribute data to be quickly and easily analyzed to facilitate constant improvements in both quality and cost.
Total Performance N/A Critical Process Filtration, Inc.® is a vertically integrated supplier of filtration products and services to industries in which filtration is considered to be a critical part of the manufacturing process. We manufacture a complete line of products to help you achieve all your filtration requirements from a single source.
  • 1 (per 10 inch length) (60/40, IPA/water wetted membrane)