Pargreen Process Technologies - Clariflow®-E Cartridges

Hydrophilic PES membrane cartridges for aqueous applications

Clariflow®-E cartridges are optimized for use in microelectronics applications such as DI water and aqueous-based chemicals. The unique mirrored anisotropic PES (Polyethersulfone) membrane has exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates.

The combination of hydrophilic PES membrane and a high-purity, all-polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle shedding.

Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure DI water, and 100% integrity tested in an ISO-certified facility.

Unit of Measure

Items	25-10205 Clariflow®-E Cartridges	25-10305 Clariflow®-E Cartridges	25-10705 Clariflow®-E Cartridges	25-10805 Clariflow®-E Cartridges	25-50205 Clariflow®-E Cartridges
Filter Rating	N/A 0.04 µm0.10 µm0.2 µm0.45 µm0.65 µm0.8 µm
Insert Style	N/A None (STD)	N/A None (STD)	N/A None (STD)	N/A None (STD)	N/A Encapsulated 316L Stainless Steel
End Fittings	N/A 226/Flat	N/A 222/Flat	N/A 226/Fin	N/A 222/Fin	N/A 226/Flat
Nominal Length	N/A 5 in130 mm
Gasket/O-Ring Material	N/A Buna N EPDM FEP Encapsulated Silicone (O-Rings only) FEP Encapsulated Viton (O-Rings only) None Silicone Viton®
Thickness (Gaskets only)	N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket
Membrane	N/A Polyethersulfone
Support Layers	N/A Polypropylene
Structure	N/A Polypropylene
Effective Filtration Area per 10 inch (250 mm) Cartridge	N/A 6.8 ft²0.63 m²
Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)	N/A 80 psid5.5 bar
Maximum Forward Differential Pressure/Temperature @ 180ºF (82ºC)	N/A 40 psid2.8 bar
Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)	N/A 50 psid3.4 bar
Cleanliness (Particle Shedding)	N/A Dry-packed: < 1 particles/ml > 0.2µm after 6gal at 1gpm Data as from open bag and installed, no additional installation flushing.
Resistivity Rinse-Up	N/A Resistivity rinse-up to background minus 0.2megohm-cm of feed after 20gal @ 1gpm.
Typical Water Flow Rates¹	N/A 0.02 µm - 0.5 gpm/psid (2.75 lpm/100mbar) 0.04 µm - 1.0 gpm/psid (5.49 lpm/100mbar) 0.10 µm - 1.8 gpm/psid (9.88 lpm/100mbar) 0.20 µm - 3.7 gpm/psid (20.31 lpm/100mbar) 0.45 µm - 4.8 gpm/psid (26.35 lpm/100mbar) 0.65 µm - 8.9 gpm/psid (48.86 lpm/100mbar) 0.80 µm - 9.5 gpm/psid (52.16 lpm/100mbar)
Benefits	N/A High-retention hydrophilic membrane High flow rate Broad chemical compatibility for multiple applications Long on-stream life 100% integrity tested
Applications	N/A BOE Dilute HF POU DI rinse Bulk DI water systems Copper plating Ni plating Hard disk wash processes Other dilute acids and bases
Technical Support and Product Information	N/A Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office. Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note	N/A Specifications are subject to change without notification. Clariflow is a registered trademark of Parker Hannifin Corporation. Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Cuno is a registered trademark of Cuno Inc.
¹ Per 10-inch (250 mm) cartridge equivalent.