| Items |
 CE2540FM CE Series Brackish Water RO Elements (Cellulose Acetate) |
CE4025T CE Series Brackish Water RO Elements (Cellulose Acetate) |
CE4026F CE Series Brackish Water RO Elements (Cellulose Acetate) |
CE4040F CE Series Brackish Water RO Elements (Cellulose Acetate) |
CE4040FM CE Series Brackish Water RO Elements (Cellulose Acetate) |
|||||
| Membrane | C-series, Cellulose Acetate | |||||||||
| Flow Average | 630 gpd2.4 m³/day | 1300 gpd4.9 m³/day | 1300 gpd4.9 m³/day | 2100 gpd7.9 m³/day | 2000 gpd7.6 m³/day | |||||
| Salt Rejection Average (NaCl) | 97.5 % | |||||||||
| Salt Rejection Minimum (NaCl) | 95.0 % | |||||||||
| Note |
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%. Testing conditions: 2,000 ppm NaCl solution at 425 psig (2,930 kPa) operating pressure, 77ºF, pH 6.5 and 15% recovery. |
|||||||||
| Active Area | 27 ft²2.5 m² | 59 ft²5.5 m² | 59 ft²5.5 m² | 95 ft²8.8 m² | 85 ft²7.9 m² | |||||
| Outer Wrap | Fiberglass | Tape | Fiberglass | Fiberglass | Fiberglass | |||||
| Part Number | 1206854 | 1206870 | 1206875 | 1206878 | 1231443 | |||||
| Dimension A (Length) | 40.0 in101.6 cm | 25.0 in63.5 cm | 26.0 in66.7 cm | 40.0 in101.6 cm | 40.0 in101.6 cm | |||||
| Dimension B1 | 0.75 inOD: 1.90 cm | 0.625 in1.59 cm | 0.625 in1.59 cm | 0.625 in1.59 cm | 0.75 inOD: 1.90 cm | |||||
| Dimension C (Outside Diameter) | 2.4 in6.1 cm | 3.9 in9.9 cm | 3.9 in9.9 cm | 3.9 in9.9 cm | 3.9 in9.9 cm | |||||
| Boxed Weight | 5 lb2.3 kg | 5 lb2.3 kg | 6 lb2.7 kg | 8 lb3.5 kg | 8 lb3.5 kg | |||||
| Typical Operating Pressure | 140 - 400 psig965 - 2758 kPa | |||||||||
| Typical Operating Flux | 10 - 18 GFD17 - 30 LMH | |||||||||
| Maximum Pressure | 450 psig3103 kPa | |||||||||
| Maximum Operating Temperature | 86 ºF30 ºC | |||||||||
| Maximum Cleaning Temperature | 86 ºF30 ºC | |||||||||
| Operating Range Recommended pH | 5.0 - 6.5 | |||||||||
| Cleaning Range Recommended pH | 3.0 - 8.0 | |||||||||
| Recommended Pressure Drop Over an Element | 12 psig83 kPa | |||||||||
| Recommended Pressure Drop Per Housing | 50 psig345 kPa | |||||||||
| Chlorine Tolerance |
1 ppm Maximum Continuous 30 ppm for 30 min. During Sanitization |
|||||||||
| Feedwater | NTU < 1 SDI < 5 | |||||||||
| Note |
These elements are shipped dry. Trademark of General Electric Company; may be registered in one or more countries. |
|||||||||
|
||||||||||
