argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1206 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
High Surface Area Pleated Micro-Fiberglass Cartridges for Critical Processes

The ACCU-CLEAR pleated cartridge line has been developed to meet the process needs and throughput requirements of the pharmaceutical, food and beverage, electronics, chemical, and other critical industries. This high performance range of filter cartridges are constructed of pleated micro-fiberglass filter medium laminated to a non-woven polyester support. The uniform pore structure of the filter medium provides consistent absolute removal of particles from 0.6 to 40 µm. The high surface area of ACCU-CLEAR filters ensure long life cycles and low initial pressure drops.

Cartridge hardware components are constructed of high purity polypropylene materials that can be safely used in critical process applications. ACCU-CLEAR cartridges are constructed and assembled in a clean room environment to minimize the possibility of contamination. ACCU-CLEAR Series cartridges are available in a wide range of configurations to fit most commercially available filter housings.
Unit of Measure

Specifications

Cartridge Media Type

 N/A Micro Fiberglass Filter Media

Series

 N/A Standard

Nominal Length

 N/A 10 in25.4 cm

Nominal Outside Diameter

 N/A 2.7 in6.8 cm

Cartridge Style

 N/A Internal 020 Ring/Flat

Utilization

 N/A Non-Steam Sterilizable Steam Sterilizable

Performance Specifications

Absolute Micron Rating

 N/A 0.6 µm

Differential Pressure @ 77º F (25º C)

 N/A 60 psid4.08 bar

Differential Pressure @ 140ºF (60ºC)

 N/A 30 psid2.04 bar

Sterilization

 N/A ACCU-CLEAR cartridges may be autoclaved for 30 minutes at 121º C under no end loading conditions.

Toxicity

 N/A ACCU-CLEAR Series filter media comply with USP XXII Standards for Class VI-121 Plastics.

Construction Materials

Media Material

 N/A Borosilicate Micro fiberglass with Acrylic Binder

Support Material

 N/A Polyester

Center Core Material

 N/A Polypropylene

Cage Material

 N/A Polypropylene

End Caps Material

 N/A Polypropylene

Gasket/O-Ring Material

 N/A Buna-N EPR PTFE Gasket PTFE/Viton Silicone Viton

Note

 N/A Viton and PTFE are registered trademarks of E.I. duPont de Nemours and Company. ACCU-CLEAR and The Clear Advantage are trademarks of Clarcor, Inc.

Applications

N/A

  • Chemical Processing
  • Food and Beverage Processing
  • Membrane Pre-filtration
  • Paints, Coatings, and Inks
  • Solvents
  • Pharmaceuticals
  • Wine Clarification
  • Sterile Air Filtration

Benefits

N/A

  • High surface area filter cartridges constructed of pleated micro-fiberglass media provide absolute particle retention and long on-stream life cycles.
  • Absolute removal ratings available from 0.6 to 40 µm.
  • The filter medium with controlled pore sizes and stringent quality control standards guarantee a uniform matrix for effective, consistent filtration performance.
  • Materials of construction provide wide chemical compatibility in most liquid and gas applications.
  • All cartridges are constructed and assembled in a clean room environment to ensure minimal particle contamination.
  • High strength, polypropylene components and advanced thermal bonding techniques ensure cartridge integrity under severe operating conditions.
  • No adhesives, binders, lubricants, or coatings are used in the manufacturing process to ensure the lowest levels of leachables or extractables.
  • Pharmaceutical grade offers 100% lot traceability.