argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1206 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
The P-Series family of polyethersulfone ultrafiltration membrane elements are characterized by a 10,000 molecular weight cut-off and greater than 96% rejection of Cytochrome-C (13,300 MW protein). PW Elements are used for pretreatment of process water and post treatment of ultrapure water.
Unit of Measure

Element Specification

Membrane

 N/A P-Series, Polyethersulfone

Active Area

 N/A 50 ft²4.6 m²

Outer Wrap

 N/A Tape

Part Number

 N/A 1207368

Dimensions and Weight

Dimension A (Length)

 N/A 25.0 in63.5 cm
Dimension B1 N/A 0.625 in1.59 cm

Dimension C (Outside Diameter)

 N/A 3.9 in9.9 cm

Boxed Weight

 N/A 5 lb2.3 kg

Operating and CIP parameters

Typical Operating Pressure

 N/A 80 - 135 psig555 - 931 kPa

Typical Operating Flux

 N/A 10 - 25 GFD15 - 40 LMH

Maximum Pressure

 N/A 200 psig1379 kPa

Maximum Operating Temperature

 N/A 122 ºF50 ºC

Maximum Cleaning Temperature

 N/A 122 ºF50 ºC

Operating Range Recommended pH

N/A 4.0 - 11.0

Cleaning Range Recommended pH

N/A 2.0 - 11.5

Recommended Pressure Drop Over an Element

 N/A 12 psig83 kPa

Recommended Pressure Drop Per Housing

 N/A 50 psig345 kPa

Chlorine Tolerance

 N/A 5,000+ ppm-days

Note

N/A This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries

  • 1 Internal diameter unless specified OD (outside diameter).