argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Capture, clean, expel: how Ronningen-Petter systems from Eaton work
Every process is unique - that’s why we offer several backwashing/tubular systems in several configurations.

Our flagship tubular systems. During backwash, a single tube is taken off-line from the process flow via a three-way valve. Once an element is clean, it is returned to service and the next element may be cleaned. The remaining elements in the filter remain operational throughout this cycle. F-Series and AFC-Series multiplex units consist of 2-20 individual tubes valved in parallel to common inlet, outlet, and drain headers. AFC-Series units are also available in economical single and duo-tube configurations, which must be removed from service for manual cleaning.

AFC-Series - high-pressure capability and modular flexibility
When your application demands high-pressure operation - up to 1,000 psi (69 bar) - and scaleable flexibility, the Ronningen-Petter AFC-Series is optimal. AFC-Series systems are available in single-, duo-, and multiplex configurations to meet your application and business demands.

Multiplex Filters
Multiplex units consist of two or more single filter units valved in parallel to common headers. This configuration enables sequential backwashing of individual elements while the system remains in operation.

AFC 2200 available in 1000 psi (101.3 bar) only.
Unit of Measure

Specifications

Strainer Model

 N/A AFC 2200 Multiplex High-Pressure Unit

Body Inlet / Outlet Size

 N/A 2 in50.8 mm
Inlet / Outlet Header Size1 N/A 3 in4 in6 in8 in10 in12 in76.2 mm101.8 mm152.4 mm203.2 mm254 mm304.8 mm

Screen Length

 N/A 36 in914.4 mm
Element Styles Available2 N/A 3.25 in (82.3mm) Diameter Single, Tri-cluster, Accuflux - 7

Body Diameter

 N/A 4.25 in114.3 mm
High Pressure Rating3 N/A 1000 psi101.3 bar

Air Requirement (Automated Units) @ 5 cfm, for Sequencing

 N/A 60 - 120 psi4.1 - 8.3 bar

Electrical Requirement (Automated Units)

 N/A 110/220 V, 50/60 Hz, Single Phase
Filter Media Material4 N/A Fabric: 230 - 1 micron Slotted: 1,600 - 25 microns Wire mesh: 1,650 - 2 microns

Cake Formation Increases Operational Efficiency

N/A While the filtration media provides some of the filtration action, collected contaminants actually further increase efficiency. We call this phenomenon "cake formation." The collected solids (or "cake") trap additional contaminants. The key to making this principle work is timely cleaning - too soon and you lose the benefit, too late and the system flow becomes hindered.

Ronningen-Petter systems come factory pre-set to backwash when the differential pressure from inlet to outlet reaches 15 psi (1 bar) - typically the optimum time to initiate backwashing, although this is adjustable.

Internal and External Backwashing Configurations

N/A Ronningen-Petter AFC-Series tubular multiplex systems are available in both internal and external backwashing configurations. Internal backwashing systems are designed for processes with system pressure greater than or equal to 45 psi (3.1 bar) and low viscosity process liquids. External backwashing systems are designed for applications with high-value process liquids and/or processes with low operating pressures.
See more image for details.

  • 1 Drain header size 3" (76.2). Consult factory for custom sizes.
  • 2 Consult media availability chart for specific retentions and types available.
  • 3 PTFE gaskets limit pressure maximum to 80 psi (5.5 bar).
  • 4 See downloads for more details.