argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Capture, clean, expel: how Ronningen-Petter systems from Eaton work
Every process is unique - that’s why we offer several backwashing/tubular systems in several configurations.

The simple, space-saving design of the AFR-Series - with only a single moving part - is ideal for the most demanding applications. The unit features a circular configuration of up to 8 tubes surrounding a central cleaning valve. During backwash, a diverter inside the cleaning valve rotates to the tube to be cleaned. This closes the tube to the incoming process liquid and opens it to the atmosphere (via the drain line). The result causes outlet process liquid to flow in reverse through the element, cleaning it of contaminants and expelling them through the drain.

AFR-Series - powerful performance in a compact footprint
The revolutionary Ronningen-Petter AFR-Series can replace an 8-station multiplex tubular system with a single unit in only a one-square-meter footprint. The simplicity of the AFR-Series design also helps to reduce overall system investment demands. Single systems can handle flow rates up to 2,000 gpm (454 m3/hr) and multiple units can be combined when higher flow rates are necessary.
Unit of Measure

Specifications

Strainer Model

N/A AFR-8-6 Multiplex Unit

Body Inlet / Outlet Size

N/A 3 in76.2 mm
Inlet / Outlet Header Size1 N/A 8 in203.2 mm

Body Diameter

N/A 6 in152.4 mm

Screen Length

N/A 36 in914.4 mm
Element Styles Available2 N/A 5-Cluster, 7-Cluster, Accuflux - 15

Pressure Rating

N/A 250 psi17.2 bar

Volumetric Capacity

N/A Each body tube = 4.8 gallons
Single Unit Weight3 N/A 1300 lb590 kg

Air Requirement @ 5 cfm, for Sequencing

N/A 60 - 120 psi4.1 - 8.3 bar

Electrical Requirement

N/A 110/220 V, 50/60 Hz, Single Phase

Filter Media Material

N/A Fabric: 230 - 1 micron Slotted: 1,600 - 25 microns Wire mesh: 1,650 - 2 microns

Additional Choices of Media Material Configuration

N/A ACCUFLUX® - seven-tube or fifteen-tube media configuration more than doubles surface area, compared to single-element filters of the same size TRI-CLUSTER® - three-tube 1 1/2" diameter media for 40 percent greater surface area than single element designs, with an economical initial investment

Cake Formation Increases Operational Efficiency

N/A While the filtration media provides some of the filtration action, collected contaminants actually further increase efficiency. We call this phenomenon "cake formation." The collected solids (or "cake") trap additional contaminants. The key to making this principle work is timely cleaning - too soon and you lose the benefit, too late and the system flow becomes hindered.

Ronningen-Petter systems come factory pre-set to backwash when the differential pressure from inlet to outlet reaches 15 psi (1 bar) - typically the optimum time to initiate backwashing, although this is adjustable.

  • 1 Drain header size 3" (76.2) weld stub.
  • 2 Consult media availability chart for specific retentions and types available.
  • 3 Weights are approximate and assume eight filled stations