argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Flotrex-HR (FHR) filters (Figure 1) are made entirely from Halar (ECTFE) (Halar is a trademark of Ausimont.), an industrial-grade fluoropolymer with excellent solvent resistance. FHR filters can withstand the harshest process conditions due to this virtually indestructible material. Providing broad chemical compatibility, you can count on our filters to produce consistent, uniform process streams in your most demanding filtration applications.

FHR filters deliver high flow rates and high-purity results with absolute rated efficiencies (99.9% filtration efficiency at rated pore size based on ASTM F795 and F661 test methods) and retention characteristics that typically outperform polypropylene fiber filters.

The FHR filter is just one example of our strong commitment to fluid treatment. Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. GE Water & Process Technologies is your complete source for filters, crossflow membranes, housings, and other filtration equipment.
Unit of Measure

Specifications

Type

 N/A FHR

Absolute Micron Rating

 N/A 10 µm

Nominal Cartridge Length

 N/A 40 in102 cm

End #1 Adapter

 N/A 222 O-Ring

End #2 Adapter

 N/A Closed End Cap
Elastomer Material1 N/A PTFE Encapsulated Viton

Note

 N/A Trademark of General Electric Company; may be registered in one or more countries

Materials of Construction

Media Material

 N/A Halar Microfiber

Support Layers

 N/A Halar

Core and Cage

 N/A Halar

Endcaps and Adapters

 N/A Halar

Dimensions

Nominal Outside Diameter

 N/A 2.75 in70 mm

Nominal Inside Diameter

 N/A 1.25 in31 mm

Effective Filtration Area

 N/A 8 ft²1 m²

Operational Limits

Maximum Forward Differential Pressure @ 70ºF (21ºC)

 N/A 60 psi4.1 bar

Maximum Reverse Differential Pressure @ 70ºF (21ºC)

 N/A 30 psi2.1 bar

Maximum Operating Temperature at 10 psid (0.69 bar) in Water

 N/A 180 ºF82 ºC

Typical Applications

N/A FHR all-Halar, melt-blown fiber filters offer outstanding performance in extremely harsh chemical environments. These FHR filters also provide cost-effective, absolute filtration at high flow rates. Available in a range of 3, 10 and 25 µm, FHR filters are manufactured and packaged in a cleanroom environment for assured cleanliness. FHR filters are designed for both pre- and final filtration. Typical applications include:

  • Filtration of aggressive chemicals including Toluene and Xylene
  • Filtration of Ozonated Water
  • Beverage

    • General Properties

    N/A Flotrex-HR filters are available the following absolute pore size micron ratings: 3, 10 and 25 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.

    Additional Information

    N/A

    • Flotrex-HR filters may be sanitized with compatible chemical agents such as ozonated water. The filters must not be autoclaved or steam sterilized.
    • Flotrex-HR filters meet the test criteria for USP24 class VI-121ºC plastics and pass the MEM Elution Cytotoxicity Test.
    • Aqueous extracts from Flotrex-HR filters contains less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. FHR filters are ozone tolerant for 9,000 ppm/hr with no extractables.

    • 1 Viton and PTFE are registered trademarks of DuPont