Type |
N/A XPLT |
Membrane/Media |
N/A PES |
Absolute Micron Rating |
N/A 0.65 µm |
Length |
N/A 20 in50.8 cm |
End #1 Adapter |
N/A 213 O-Ring |
End #2 Adapter |
N/A Open End Gasket |
| Elastomer Material1 | N/A Buna-N EPDM Silicone Viton |
Note |
N/A
XPleat is available in case quantities only. XPleat part numbers reflect case quantities of six (6). Trademark of General Electric Company; may be registered in one or more countries. |
Filter Media Material |
N/A Polyethersulfone Membrane |
Media Support Material |
N/A Polypropylene Microfiber |
Components |
N/A Polypropylene |
Sealing |
N/A Thermal Bonding |
| O-Rings/Gaskets2 | N/A Buna EPDM Silicone Viton |
Outside Diameter |
N/A 2.75 in70 mm |
Inside Diameter |
N/A 1.25 in31 mm |
Effective Filtration Area |
N/A 9 ft²1 m² |
Maximum Forward Differential Pressure |
N/A 60 psi4.14 bar |
Maximum Reverse Differential Pressure |
N/A 30 psi2.07 bar |
Maximum Operating Temperature at 10 psid (0.69 bar) in Water |
N/A 180 ºF82 ºC |
|
N/A
|
|
N/A XPleat filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance. |
|
N/A GE Water & Process Technologies filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information. |
