Prefilter Layer |
N/A Glass Fiber |
Insert Style |
N/A Encapsulated 316 SS |
End Fittings |
N/A 226/Fin |
Nominal Length |
N/A 40 in1000 mm |
Filter Rating |
N/A 0.8 µm |
Gasket/O-Ring Material |
N/A Buna N EPDM FEP-Encapsulated Silicone (O-Rings only) FEP-Encapsulated Viton® (O-Rings only) None Silicone Viton® |
Thickness (Gaskets only) |
N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket |
Grade |
N/A Biological General |
Maximum Forward Operating Conditions @ 75ºF (24ºC) |
N/A 60 psid4.1 bar |
Maximum Reverse Operating Conditions @ 75ºF (24ºC) |
N/A 30 psid2.0 bar |
Typical Water Flow Rates1 | N/A 8.5 gpm/psid46.67 lpm/100 mbar |
Bubble Point |
N/A 14 psig1.0 bar |
Diffusional Flow |
N/A 20 mL/min |
Diffusional Test Pressure |
N/A 11 psig0.7 bar |
Note |
N/A Tested in deionized water |
N/A
|
N/A
Prefiltration/clarification of: |
N/A
Either glass fiber or polypropylene depth media over with a PES membrane layer. Media support layers and cartridge structure are
polypropylene. |
N/A Cartridges can be steamed or autoclaved for at least 10 one-hour cycles @ 121ºC (250ºF). Cartridges can also be hot water or chemically sanitized in place using common sanitizing agents. Please contact Parker for detailed procedures. |
N/A All biological grade elements are integrity tested by a diffusive flow method during manufacturing |
N/A
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office. |