argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1206 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases

The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Proflow™ II-E Filter Cartridges
Unit of Measure
 1 2 3 4 5 »  

Item #

Treatment Application

Insert Style

End Fittings

Nominal Length

Membrane

Support Layers

34-10705 N/A Standard N/A No Insert N/A 226/Fin N/A 5 in130 mm N/A PTFE N/A Polypropylene
34-10710 N/A Standard N/A No Insert N/A 226/Fin N/A 10 in250 mm N/A PTFE N/A Polypropylene
34-10720 N/A Standard N/A No Insert N/A 226/Fin N/A 20 in500 mm N/A PTFE N/A Polypropylene
34-10730 N/A Standard N/A No Insert N/A 226/Fin N/A 30 in750 mm N/A PTFE N/A Polypropylene
34-10740 N/A Standard N/A No Insert N/A 226/Fin N/A 40 in1000 mm N/A PTFE N/A Polypropylene
34-10805 N/A Standard N/A No Insert N/A 222/Fin® N/A 5 in130 mm N/A PTFE N/A Polypropylene
34-10810 N/A Standard N/A No Insert N/A 222/Fin® N/A 10 in250 mm N/A PTFE N/A Polypropylene
34-10820 N/A Standard N/A No Insert N/A 222/Fin® N/A 20 in500 mm N/A PTFE N/A Polypropylene
34-10830 N/A Standard N/A No Insert N/A 222/Fin® N/A 30 in750 mm N/A PTFE N/A Polypropylene
34-10840 N/A Standard N/A No Insert N/A 222/Fin® N/A 40 in1000 mm N/A PTFE N/A Polypropylene
34-10G05 N/A Standard N/A No Insert N/A 120/Internal/Recessed Endcap N/A 5 in130 mm N/A PTFE N/A Polypropylene
34-10G10 N/A Standard N/A No Insert N/A 120/Internal/Recessed Endcap N/A 10 in250 mm N/A PTFE N/A Polypropylene
34-10G20 N/A Standard N/A No Insert N/A 120/Internal/Recessed Endcap N/A 20 in500 mm N/A PTFE N/A Polypropylene
34-10G30 N/A Standard N/A No Insert N/A 120/Internal/Recessed Endcap N/A 30 in750 mm N/A PTFE N/A Polypropylene
34-10G40 N/A Standard N/A No Insert N/A 120/Internal/Recessed Endcap N/A 40 in1000 mm N/A PTFE N/A Polypropylene
34-10H05 N/A Standard N/A No Insert N/A 213/Recessed Endcap (Ametek) N/A 5 in130 mm N/A PTFE N/A Polypropylene
34-10H10 N/A Standard N/A No Insert N/A 213/Recessed Endcap (Ametek) N/A 10 in250 mm N/A PTFE N/A Polypropylene
34-10H20 N/A Standard N/A No Insert N/A 213/Recessed Endcap (Ametek) N/A 20 in500 mm N/A PTFE N/A Polypropylene
34-10H30 N/A Standard N/A No Insert N/A 213/Recessed Endcap (Ametek) N/A 30 in750 mm N/A PTFE N/A Polypropylene
34-10H40 N/A Standard N/A No Insert N/A 213/Recessed Endcap (Ametek) N/A 40 in1000 mm N/A PTFE N/A Polypropylene
34-10R05 N/A Standard N/A No Insert N/A 222/Recessed Endcap N/A 5 in130 mm N/A PTFE N/A Polypropylene
34-10R10 N/A Standard N/A No Insert N/A 222/Recessed Endcap N/A 10 in250 mm N/A PTFE N/A Polypropylene
34-10R20 N/A Standard N/A No Insert N/A 222/Recessed Endcap N/A 20 in500 mm N/A PTFE N/A Polypropylene
34-10R30 N/A Standard N/A No Insert N/A 222/Recessed Endcap N/A 30 in750 mm N/A PTFE N/A Polypropylene
34-10R40 N/A Standard N/A No Insert N/A 222/Recessed Endcap N/A 40 in1000 mm N/A PTFE N/A Polypropylene
Unit of Measure
 1 2 3 4 5 »