| Items |
 FPN921A Flotrex™ PN Pleated Filters with Polypropylene Microfiber Media |
FPN921B Flotrex™ PN Pleated Filters with Polypropylene Microfiber Media |
FPN921C Flotrex™ PN Pleated Filters with Polypropylene Microfiber Media |
FPN921E Flotrex™ PN Pleated Filters with Polypropylene Microfiber Media |
FPN921F Flotrex™ PN Pleated Filters with Polypropylene Microfiber Media |
|||||
| Type | FPN | |||||||||
| Nominal Micron Rating | 0.2 µm | |||||||||
| Nominal Cartridge Length | 10 in25 cm | |||||||||
| End #1 Adapter1 | Open End Gasket | 120 O-Ring | 213 O-Ring | 222 O-Ring | 226 O-Ring | |||||
| End #2 Adapter | 120 O-Ring 213 O-Ring Closed End Cap Fin Adapter Open End Gasket | |||||||||
| Elastomer Material2 | Buna-N EPDM PTFE Silicone Viton | |||||||||
| Filtration Media | Polypropylene Microfiber | |||||||||
| Support Layers | Polypropylene Microfiber | |||||||||
| Core and Cage | Polypropylene | |||||||||
| Endcaps and Adapters | Polypropylene | |||||||||
| Filter Model | FPN92 | |||||||||
| Nominal Outside Diameter | 2.75 in70 mm | |||||||||
| Nominal Inside Diameter | 1.25 in31 mm | |||||||||
| Effective Filtration Area | 5 ft²0 m² | |||||||||
| Maximum Forward Differential Pressure @ 70ºF (21ºC) | 60 psi4.1 bar | |||||||||
| Maximum Reverse Differential Pressure @ 70ºF (21ºC) | 30 psi2.1 bar | |||||||||
| Maximum Operating Temperature at 10 psid (0.69 bar) in Water | 180 ºF82 ºC | |||||||||
| Note | Trademark of General Electric Company; may be registered in one or more countries | |||||||||
| Typical Applications |
FPN filters are an economical alternative to membrane filters in a broad range of applications, Including: |
|||||||||
| General Properties | Flotrex PN filters are available in the following nominal pore size micron rating: 0.2, 0.45, 1, 2, 3, 5, 10 and 30 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance. | |||||||||
| Additional Information |
|
|||||||||
|
||||||||||
