Proflow™ II-E Filter Cartridges
Parker Membrane Filters
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Item # |
Treatment Application |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
|---|---|---|---|---|---|---|
 | ||||||
| 34-10005 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10105 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A DOE | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10205 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 226/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10305 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10605 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10705 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10805 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10G05 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10H05 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-10R05 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50005 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50105 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A DOE | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50205 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 226/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50305 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50605 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50705 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50805 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50G05 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50H05 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-50R05 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-60005 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-60105 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A DOE | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-60205 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 226/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-60305 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
| 34-60605 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
