ROSave.Z is manufactured using patent pending Z.Plex filter technology (Figure 1) and is engineered for reverse osmosis pretreatment and other pure water applications. ROSave.Zs' proprietary filter matrix provides unmatched performance in these applications.
- Up to twice the life of conventional depth filters
- Up to 50% lower pressure drop
- Up to 100% greater dirt holding capacity
- Superior SDI reduction
- Melt-bonded exterior ensures no media migration
- Provides lower total cost of filtration operations
- NSF 42 certified, FDA compliant
Specifications
Type |
N/A RO.Zs |
Micron Rating |
N/A 5 µm |
Cartridge Length |
N/A 30 in76.2 cm |
End #1 Adapter |
N/A Extended Core |
End #2 Adapter |
N/A Solid End |
O-Rings Material |
N/A Buna EPDM Santoprene (Flat Gasket Only) Silicone Viton |
Nominal Outside Diameter |
N/A 2.50 in6.4 cm |
Nominal Inside Diameter |
N/A 1 in2.5 mm |
Note |
N/A Trademark of General Electric Company; may be registered in one or more countries. |
Typical Applications
N/A
Reverse osmosis pretreatment in industries including: |
General Properties
N/A
Materials of Construction |
Micron Ratings, Lengths and End Adapters
N/A
|
Additional Information
N/A
ROSave.Z cartridge filters are made from thermally bonded fibers of polypropylene. GE Water & Process Technologies certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of U.S. FDA 21CFR regulations. When required, specify only FDA compliant sealing materials and end-adapters. |