Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY011CA MNY011CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011CB MNY011CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011CC MNY011CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011CG MNY011CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011CH MNY011CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011EA MNY011EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011EB MNY011EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011EC MNY011EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011EG MNY011EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011EH MNY011EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011FA MNY011FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011FB MNY011FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011FC MNY011FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011FG MNY011FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011FH MNY011FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011JA MNY011JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011JB MNY011JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011JC MNY011JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011JG MNY011JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011JH MNY011JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011QA MNY011QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011QB MNY011QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011QC MNY011QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011QG MNY011QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011QH MNY011QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
