Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY012FA MNY012FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012FB MNY012FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012FC MNY012FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012FG MNY012FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012FH MNY012FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012JA MNY012JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012JB MNY012JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012JC MNY012JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012JG MNY012JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012JH MNY012JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012QA MNY012QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012QB MNY012QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012QC MNY012QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012QG MNY012QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012QH MNY012QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012ZA MNY012ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012ZB MNY012ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012ZC MNY012ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012ZG MNY012ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012ZH MNY012ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013AA MNY013AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013AB MNY013AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013AC MNY013AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013AG MNY013AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013AH MNY013AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
