Memtrex™ FE Pleated Filters with PTFE Membrane
GE Membrane Filters
Memtrex FE (MFE) filters (Figure 1), with absolute rated PTFE membranes offer broad chemical compatibility with minimal extractables in a wide range of fluids and applications. The inherently hydrophobic PTFE membrane is ideally suited for the filtration of compressed air and other process gases. Constructed in a clean room environment using thermal welding techniques, the MFE filters do not contain any adhesives or additives. As part of the manufacturing process, the MFE filters are individually integrity tested. The effectiveness and purity of your filtration process is preserved.
The MFE filter is just one example of our dedicated commitment to fluid filtration. Our extensive portfolio includes filters for every stage of processing, and we can offer custom solutions for your unique applications. GE Water & Process Technologies is your complete source for filters, housings, and other filtration equipment.
The MFE filter is just one example of our dedicated commitment to fluid filtration. Our extensive portfolio includes filters for every stage of processing, and we can offer custom solutions for your unique applications. GE Water & Process Technologies is your complete source for filters, housings, and other filtration equipment.
Item # |
Type |
Absolute Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MFE911JA MFE911JA/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911JB MFE911JB/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911JC MFE911JC/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911JG MFE911JG/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911JH MFE911JH/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911QA MFE911QA/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911QB MFE911QB/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911QC MFE911QC/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911QG MFE911QG/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911QH MFE911QH/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911ZA MFE911ZA/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911ZB MFE911ZB/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911ZC MFE911ZC/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911ZG MFE911ZG/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE911ZH MFE911ZH/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Support Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912AA MFE912AA/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912AB MFE912AB/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912AC MFE912AC/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912AG MFE912AG/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912AH MFE912AH/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912BA MFE912BA/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912BB MFE912BB/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912BC MFE912BC/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912BG MFE912BG/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
| MFE912BH MFE912BH/Asset/45-1.jpg | Type N/A MFE | Absolute Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 5 cc/min at 40 psig≤ 5 cc/min at 2.76 bar |
