Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY923ZA MNY923ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923ZB MNY923ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923ZC MNY923ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923ZG MNY923ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923ZH MNY923ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924AA MNY924AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924AB MNY924AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924AC MNY924AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924AG MNY924AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924AH MNY924AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924BA MNY924BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924BB MNY924BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924BC MNY924BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924BG MNY924BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924BH MNY924BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924CA MNY924CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924CB MNY924CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924CC MNY924CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924CG MNY924CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924CH MNY924CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924EA MNY924EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924EB MNY924EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924EC MNY924EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924EG MNY924EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924EH MNY924EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
