Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY911JA MNY911JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911JB MNY911JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911JC MNY911JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911JG MNY911JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911JH MNY911JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911QA MNY911QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911QB MNY911QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911QC MNY911QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911QG MNY911QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911QH MNY911QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911ZA MNY911ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911ZB MNY911ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911ZC MNY911ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911ZG MNY911ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY911ZH MNY911ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912AA MNY912AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912AB MNY912AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912AC MNY912AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912AG MNY912AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912AH MNY912AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912BA MNY912BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912BB MNY912BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912BC MNY912BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912BG MNY912BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912BH MNY912BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
