Proflow™ II-E Filter Cartridges
Parker Membrane Filters
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Item # |
Treatment Application |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
---|---|---|---|---|---|---|
34-60705 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60805 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60G05 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H05 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60R05 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0005 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0105 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0205 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 226/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0305 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0605 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0705 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0805 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0G05 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H05 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0R05 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10005 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10105 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A DOE | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10205 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 226/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10305 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10605 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10705 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10805 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10G05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10H05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-10R05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A No Insert | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |