Pargreen Process Technologies - CPD Grade Pleated Polypropylene Depth Cartridges

Commercial Polypropylene Depth Media Filter Cartridges Engineered and Manufactured for Maximum Efficiency and Value

CPD pleated polypropylene depth cartridges are designed for clarifying applications requiring high flow capacity. The depth media utilized in the CPD product line is high loft Melt-blown polypropylene which gives exceptional flow characteristics and high dirt holding capacity because of its high internal porosity. Fine polypropylene fibers are bonded together to ensure no fiber release in a fiber matrix that maintains high porosity. Rated at 99.9% efficiencies make it a cost effective filter designed to extend final filter life.

Request Information

Unit of Measure

Items	*CPD10N00001** CPD Grade Pleated Polypropylene Depth Cartridges	*CPD10N00002** CPD Grade Pleated Polypropylene Depth Cartridges	*CPD10N00003** CPD Grade Pleated Polypropylene Depth Cartridges	*CPD10N00004** CPD Grade Pleated Polypropylene Depth Cartridges	*CPD20N00001** CPD Grade Pleated Polypropylene Depth Cartridges
Pore size	N/A 0.10 µm	N/A 0.10 µm	N/A 0.10 µm	N/A 0.10 µm	N/A 0.22 µm
316 SS Ring	N/A No Ring
Cartridge Length	N/A 10 in25.4 cm	N/A 20 in50.8 cm	N/A 30 in76.2 cm	N/A 40 in101.6 cm	N/A 10 in25.4 cm
End Caps	N/A 213/119 Both Ends 213/119 w/ Plug 2-222 O-ring / Flat 2-222 O-ring with Spear 2-226 O-ring / Flat 2-226 O-ring with Spear Flat Gasket, double open end
Flow Rate	N/A 1.0 gpm3.79 lpm	N/A 1.0 gpm3.79 lpm	N/A 1.0 gpm3.79 lpm	N/A 1.0 gpm3.79 lpm	N/A 3.0 gpm11.35 lpm
Filtration Media	N/A Polypropylene
Filtration Media Support Material	N/A Polypropylene
End Caps Material	N/A Polypropylene
Center Core Material	N/A Polypropylene
Outer Support Cage Material	N/A Polypropylene
Sealing Method	N/A Thermal Bonding
O-Rings Material	N/A Buna EP PTFE® Encapsulated Silicone PTFE® Encapsulated Viton® Silicone Viton®
Note	N/A All materials of construction are FDA accepted.
Forward Differential Pressure at 20ºC	N/A 50 psi3.4 bar
Reverse Differential Pressure at 20ºC	N/A 20 psi1.4 bar
Operating Temperature at 10 psid (0.69 bar) in Water	N/A 175 ºF80 ºC
Nominal Length	N/A 10 to 40 in25.4 to 101.6 cm
Nominal Outside Diameter	N/A 2.50 in6.35 cm
Filtration Area Per 10" Length	N/A 6.5 ft²0.60 m²
Flow Rate	N/A See the Flow Rate table in more image which represents typical water flow at a one psi (69 mbar) pressure differential across a single 10 inch cartridge element. The test fluid is water at ambient temperature. Extrapolation for housings with multiple elements and higher pressure drops is acceptable, but as flows increase the pressure drop of the housing becomes more apparent.