Pargreen Process Technologies - Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber

Flotrex-HR (FHR) filters (Figure 1) are made entirely from Halar (ECTFE) (Halar is a trademark of Ausimont.), an industrial-grade fluoropolymer with excellent solvent resistance. FHR filters can withstand the harshest process conditions due to this virtually indestructible material. Providing broad chemical compatibility, you can count on our filters to produce consistent, uniform process streams in your most demanding filtration applications.

FHR filters deliver high flow rates and high-purity results with absolute rated efficiencies (99.9% filtration efficiency at rated pore size based on ASTM F795 and F661 test methods) and retention characteristics that typically outperform polypropylene fiber filters.

The FHR filter is just one example of our strong commitment to fluid treatment. Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. GE Water & Process Technologies is your complete source for filters, crossflow membranes, housings, and other filtration equipment.

Request Information

Unit of Measure

Items	FHR031AAV Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber	FHR031AAT Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber	FHR031AGV Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber	FHR031AGT Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber	FHR031AHV Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber
Type	N/A FHR
Absolute Micron Rating	N/A 3.0 µm
Nominal Cartridge Length	N/A 10 in25 cm
End #1 Adapter	N/A Open End Gasket
End #2 Adapter	N/A Open End Gasket	N/A Open End Gasket	N/A Closed End Cap	N/A Closed End Cap	N/A Fin Adapter
Elastomer Material¹	N/A Viton	N/A PTFE Encapsulated Viton	N/A Viton	N/A PTFE Encapsulated Viton	N/A Viton
Media Material	N/A Halar Microfiber
Support Layers	N/A Halar
Core and Cage	N/A Halar
Endcaps and Adapters	N/A Halar
Nominal Outside Diameter	N/A 2.75 in70 mm
Nominal Inside Diameter	N/A 1.25 in31 mm
Effective Filtration Area	N/A 8 ft²1 m²
Maximum Forward Differential Pressure @ 70ºF (21ºC)	N/A 60 psi4.1 bar
Maximum Reverse Differential Pressure @ 70ºF (21ºC)	N/A 30 psi2.1 bar
Maximum Operating Temperature at 10 psid (0.69 bar) in Water	N/A 180 ºF82 ºC
Note	N/A Trademark of General Electric Company; may be registered in one or more countries
Typical Applications	N/A FHR all-Halar, melt-blown fiber filters offer outstanding performance in extremely harsh chemical environments. These FHR filters also provide cost-effective, absolute filtration at high flow rates. Available in a range of 3, 10 and 25 µm, FHR filters are manufactured and packaged in a cleanroom environment for assured cleanliness. FHR filters are designed for both pre- and final filtration. Typical applications include: Filtration of aggressive chemicals including Toluene and Xylene Filtration of Ozonated Water Beverage
General Properties	N/A Flotrex-HR filters are available the following absolute pore size micron ratings: 3, 10 and 25 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.
Additional Information	N/A Flotrex-HR filters may be sanitized with compatible chemical agents such as ozonated water. The filters must not be autoclaved or steam sterilized. Flotrex-HR filters meet the test criteria for USP24 class VI-121ºC plastics and pass the MEM Elution Cytotoxicity Test. Aqueous extracts from Flotrex-HR filters contains less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. FHR filters are ozone tolerant for 9,000 ppm/hr with no extractables.
¹ Viton and PTFE are registered trademarks of DuPont