| Items |
 MMP911AA Memtrex™ MP Pleated Filters with Polyethersulfone Membrane |
MMP911AB Memtrex™ MP Pleated Filters with Polyethersulfone Membrane |
MMP911AC Memtrex™ MP Pleated Filters with Polyethersulfone Membrane |
MMP911AG Memtrex™ MP Pleated Filters with Polyethersulfone Membrane |
MMP911AH Memtrex™ MP Pleated Filters with Polyethersulfone Membrane |
|||||
| Absolute Micron Rating | 0.1 µm | |||||||||
| Nominal Cartridge Length | 10 in25 cm | |||||||||
| End #1 Adapter1 | Open End Gasket | |||||||||
| End #2 Adapter | Open End Gasket | 120 O-Ring | 213 O-Ring | Closed End Cap | Fin Adapter | |||||
| Elastomer Material2 | Buna-N EPDM Silicone Viton | |||||||||
| Filtration Media | Hydrophilic Polyethersulfone Membrane | |||||||||
| Support Layers | Polypropylene Microfiber | |||||||||
| Core and Cage | Polypropylene | |||||||||
| Endcaps and Adapters | Polypropylene | |||||||||
| Nominal Outside Diameter | 2.75 in70 mm | |||||||||
| Nominal Inside Diameter | 1.25 in31 mm | |||||||||
| Effective Filtration Area | 8 ft²1 m² | |||||||||
| Maximum Forward Differential Pressure @ 70ºF (21ºC) | 60 psid4.2 bar | |||||||||
| Maximum Reverse Differential Pressure @ 70ºF (21ºC) | 30 psid2.1 bar | |||||||||
| Maximum Operating Temperature at 10 psid (0.7 bar) in Water | 180 ºF82 ºC | |||||||||
| Integrity Testing3 | ≤ 45 cc/min at 50 psig≤ 45 cc/min at 3.4 bar | |||||||||
| Note | Trademark of General Electric Company; may be registered in one or more countries. | |||||||||
| Typical Applications |
MMP filters are suitable for a broad range of applications, including filtration of: |
|||||||||
| General Properties | Memtrex MP filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance. | |||||||||
| Additional Information |
|
|||||||||
|
||||||||||
