XPleat™ GF Filters
GE Pleated Filters
Glass Microfiber Nominal and Absolute
For applications requiring higher flow rates.
For applications requiring higher flow rates.
Unit of Measure
Items |
/Asset/107-1.jpg XPLT-GF-0.2-10-OEG-OEG XPleat™ GF Filters |
/Asset/107-1.jpg XPLT-GF-0.2-10-OEG-213 XPleat™ GF Filters |
/Asset/107-1.jpg XPLT-GF-0.2-10-OEG-FIN XPleat™ GF Filters |
/Asset/107-1.jpg XPLT-GF-0.2-10-OEG-FLT XPleat™ GF Filters |
/Asset/107-1.jpg XPLT-GF-0.2-10-213-OEG XPleat™ GF Filters |
|||||
Type | N/A XPLT | |||||||||
Membrane/Media | N/A GF | |||||||||
Nominal Micron Rating | N/A 0.2 µm | |||||||||
Absolute Micron Rating | N/A 1.0 µm | |||||||||
Length | N/A 10 in25.4 cm | |||||||||
End #1 Adapter | N/A Open End Gasket | N/A Open End Gasket | N/A Open End Gasket | N/A Open End Gasket | N/A 213 O-Ring | |||||
End #2 Adapter | N/A Open End Gasket | N/A 213 O-Ring | N/A Fin Adapter | N/A FLT | N/A Open End Gasket | |||||
Elastomer Material1 | N/A Buna-N EPDM Silicone Viton | |||||||||
Filter Media Material | N/A Glass Microfiber | |||||||||
Media Support Material | N/A Polyester | |||||||||
Components | N/A Polypropylene | |||||||||
Sealing | N/A Thermal Bonding | |||||||||
O-Rings/Gaskets2 | N/A Buna EPDM Silicone Viton | |||||||||
Outside Diameter | N/A 2.75 in70 mm | |||||||||
Inside Diameter | N/A 1.25 in31 mm | |||||||||
Effective Filtration Area | N/A 9 ft²1 m² | |||||||||
Maximum Forward Differential Pressure | N/A 60 psid4.14 bar | |||||||||
Maximum Reverse Differential Pressure | N/A 30 psid2.07 bar | |||||||||
Maximum Operating Temperature at 10 psi (0.69 bar) in Water | N/A 180 ºF82 ºC | |||||||||
Note |
N/A
XPleat is available in case quantities only. XPleat part numbers reflect case quantities of six (6). Trademark of General Electric Company; may be registered in one or more countries. |
|||||||||
Typical Applications |
N/A
|
|||||||||
General Properties | N/A XPleat GF filters are available in nominal and absolute micron ratings (Figure 1). The nominal micron ratings are: 0.2, 0.45, 1.0, 3.0 and 10.0 µm. The absolute micron ratings are 1.0, 2.0, 4.0, 8.0 and 15.0 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance. | |||||||||
Additional Information |
N/A
|
|||||||||
|