Pargreen Process Technologies - Proflow™ II-E Filter Cartridges

Chemically-resistant cartridge for ultrapure microelectronics fluids and gases

The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.

Request Information

Unit of Measure

Items	34-10005 Proflow™ II-E Filter Cartridges	34-10010 Proflow™ II-E Filter Cartridges	34-10020 Proflow™ II-E Filter Cartridges	34-10030 Proflow™ II-E Filter Cartridges	34-10040 Proflow™ II-E Filter Cartridges
Filter Rating	N/A 0.03 µm0.05 µm0.10 µm0.2 µm0.45 µm1 µm
Treatment Application	N/A Standard
Insert Style	N/A No Insert
End Fittings	N/A DOE (CUNO®)
Nominal Length	N/A 5 in130 mm	N/A 10 in250 mm	N/A 20 in500 mm	N/A 30 in750 mm	N/A 40 in1000 mm
Gasket/O-Ring Material	N/A Buna N EPDM FEP-Encapsulated Silicone (O-Rings only) FEP-Encapsulated Viton (O-Rings only) None Silicone Viton®
Thickness (Gaskets only)	N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket
Treatment Options	N/A Standard Wet Packed
Membrane	N/A PTFE
Support Layers	N/A Polypropylene
Structure	N/A Polypropylene
Effective Filtration Area per 5 inch (130 mm) Cartridge	N/A 4.6 ft²0.43 m²
Effective Filtration Area per 10 inch (250 mm) Cartridge	N/A 9.3 ft²0.86 m²
Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)	N/A 80 psid5.5 bar
Maximum Forward Differential Pressure/Temperature @ 180ºF (82ºC)	N/A 40 psid2.8 bar
Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)	N/A 50 psid3.4 bar
Cleanliness (Particle Shedding)	N/A Wet-packed: < 1 particles/ml > 0.2µm after 6gal at 1gpm Data as from open bag and installed, no additional installation flushing.
TOC/Resistivity Rinse-Up (Wet-Packed)	N/A TOC rinse-up to background plus 5ppb of feed after 70gal @ 1gpm. Resistivity rinse-up to background minus 0.2megohm-cm of feed after 30gal @ 1gpm..
Typical Water Flow Rates¹	N/A 0.03 µm - 0.6 gpm/psid (3.31 lpm/100 mbar) 0.05 µm - 0.8 gpm/psid (4.39 lpm/100 mbar) 0.10 µm - 1 .7 gpm/psid (9.33 lpm/100 mbar) 0.20 µm - 3.2 gpm/psid (17.5 lpm/100 mbar) 0.45 µm - 7.6 gpm/psid (41.72 lpm/100 mbar) 1.00 µm - 9.1 gpm/psid (49.97 lpm/100 mbar)
Benefits	N/A Good liquid and gas flow rates Wet-pack option for quick installation PTFE/PP construction for chemical resistance Wide variety of configurations and ratings 100% integrity tested in clean room environment
Applications	N/A Bulk chemical delivery - Acids, bases, solvents, photochemicals Wet etch and clean - Dilute acids - DI water(< 80°C) Ultrapure electronics-grade gases
Technical Support and Product Information	N/A Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office. Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note	N/A Specifications are subject to change without notification. Proflow is a registered trademark of Parker Hannifin Corporation. Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Cuno is a registered trademark of Cuno Inc.
¹ Per 10-inch (250mm) cartridge equivalent.