Industry’s Filtration Partner
The P-Series family of polyethersulfone ultrafiltration membrane elements are characterized by a 10,000 molecular weight cut-off and greater than 96% rejection of Cytochrome-C (13,300 MW protein). PW Elements are used for pretreatment of process water and post treatment of ultrapure water.
Unit of Measure
Items
Element-Dimensions-Diagram---Male

PW Series Ultrafiltration - Post Treatment of RO and NF

Element-Dimensions-Diagram---Male

PW Series Ultrafiltration - Post Treatment of RO and NF

Element-Dimensions-Diagram---Male

PW Series Ultrafiltration - Post Treatment of RO and NF

Element-Dimensions-Diagram---Male

PW Series Ultrafiltration - Post Treatment of RO and NF
Membrane N/A P-Series, Polyethersulfone
Active Area N/A 50 ft²4.6 m² N/A 85 ft²7.9 m² N/A 85 ft²7.9 m² N/A 350 ft²32.5 m²
Outer Wrap N/A Tape N/A Tape N/A Fiberglass N/A Fiberglass
Part Number N/A 1207368 N/A 1207379 N/A 1207376 N/A 1207404
Dimension A (Length) N/A 25.0 in63.5 cm N/A 40.0 in101.6 cm N/A 40.0 in101.6 cm N/A 40.0 in101.6 cm
Dimension B1 N/A 0.625 in1.59 cm N/A 0.625 in1.59 cm N/A 0.625 in1.59 cm N/A 1.125 in2.86 cm
Dimension C (Outside Diameter) N/A 3.9 in9.9 cm N/A 3.9 in9.9 cm N/A 3.9 in9.9 cm N/A 7.9 in20.1 cm
Boxed Weight N/A 5 lb2.3 kg N/A 8 lb3.5 kg N/A 8 lb3.5 kg N/A 32 lb14.5 kg
Typical Operating Pressure N/A 80 - 135 psig555 - 931 kPa
Typical Operating Flux N/A 10 - 25 GFD15 - 40 LMH
Maximum Pressure N/A 200 psig1379 kPa
Maximum Operating Temperature N/A 122 ºF50 ºC
Maximum Cleaning Temperature N/A 122 ºF50 ºC
Operating Range Recommended pH N/A 4.0 - 11.0
Cleaning Range Recommended pH N/A 2.0 - 11.5
Recommended Pressure Drop Over an Element N/A 12 psig83 kPa
Recommended Pressure Drop Per Housing N/A 50 psig345 kPa
Chlorine Tolerance N/A 5,000+ ppm-days
Note N/A This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries
  • 1 Internal diameter unless specified OD (outside diameter).