argreen Process Technologies | From Coarse Straining Down to Microfiltration, Reverse Osmosis and Ultra Filtration
Pargreen Process Technologies
1224 Capitol Drive
Addison, IL. 60101
USA

Call: 800.323.2810
Fax: 630.628.3050
Email: sales@pargreen.com
Website: www.pargreen.com
Print Back
The H-Series proprietary thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. Divalent and multivalent ion rejection is dependent upon feed concentration and composition.

HL Nanofiltration Elements are used for water softening, color removal, and reduction of THM potential.
Element-Dimensions-Diagram---Male
Unit of Measure
Items Element-Dimensions-Diagram---Male
HL2540FM
HL Series Water Softening NF Elements
Element-Dimensions-Diagram---Male
HL2540TM
HL Series Water Softening NF Elements
Element-Dimensions-Diagram---Male
HL4040FM
HL Series Water Softening NF Elements
Element-Dimensions-Diagram---Male
HL4040TM
HL Series Water Softening NF Elements
Element-Dimensions-Diagram---Male
HL8040F 365
HL Series Water Softening NF Elements
Membrane N/A H-Series, Thin-Film Membrane (TFM™)
Flow Average N/A 780 gpd3.0 m³/day N/A 780 gpd3.0 m³/day N/A 2400 gpd9.1 m³/day N/A 2400 gpd9.1 m³/day N/A 10800 gpd40.9 m³/day
Salt Rejection Average (MgSO4) N/A 98.0 %
Salt Rejection Minimum (MgSO4) N/A 96.0 %
Note N/A Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000ppm MgSO4 solution at 100psig (690 kPa) operating pressure, 77ºF, pH7.5 and 15% recovery.
Active Area N/A 27 ft²2.5 m² N/A 27 ft²2.5 m² N/A 89 ft²8.2 m² N/A 89 ft²8.2 m² N/A 365 ft²33.9 m²
Outer Wrap N/A Fiberglass N/A Tape N/A Fiberglass N/A Tape N/A Fiberglass
Part Number N/A 1207230 N/A 1207231 N/A 1207236 N/A 1220990 N/A 1266702
Dimension A (Length) N/A 40.0 in101.6 cm
Dimension B1 N/A 0.75 inOD: 1.90 cm N/A 0.75 inOD: 1.90 cm N/A 0.75 inOD: 1.90 cm N/A 0.75 inOD: 1.90 cm N/A 1.125 in2.86 cm
Dimension C (Outside Diameter) N/A 2.4 in6.1 cm N/A 2.4 in6.1 cm N/A 3.9 in9.9 cm N/A 3.9 in9.9 cm N/A 7.9 in20.1 cm
Boxed Weight N/A 5 lb2.3 kg N/A 5 lb2.3 kg N/A 8 lb3.5 kg N/A 8 lb3.5 kg N/A 32 lb14.5 kg
Typical Operating Pressure N/A 70 - 300 psig483 - 2069 kPa
Typical Operating Flux N/A 10 - 20 GFD15 - 35 LMH
Maximum Pressure (Tape Elements) N/A 450 psig3103 kPa
Maximum Pressure (Other Outerwrap) N/A 600 psig4140 kPa
Maximum Operating Temperature N/A 122 ºF50 ºC
Maximum Cleaning Temperature N/A 104 ºF40 ºC
Optimum Rejection Recommended pH N/A 6.0 - 7.0
Operating Range Recommended pH N/A 3.0 - 9.0
Cleaning Range Recommended pH N/A 2.0 - 10.5
Recommended Pressure Drop Over an Element N/A 12 psig83 kPa
Recommended Pressure Drop Per Housing N/A 50 psig345 kPa
Chlorine Tolerance N/A 1,000+ ppm-hours, Dechlorination Recommended
Feedwater N/A NTU < 1 SDI < 5
Note N/A This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries
  • 1 Internal diameter unless specified OD (outside diameter).