Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY922JA MNY922JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922JB MNY922JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922JC MNY922JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922JG MNY922JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922JH MNY922JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922QA MNY922QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922QB MNY922QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922QC MNY922QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922QG MNY922QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922QH MNY922QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922ZA MNY922ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922ZB MNY922ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922ZC MNY922ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922ZG MNY922ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY922ZH MNY922ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923AA MNY923AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923AB MNY923AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923AC MNY923AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923AG MNY923AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923AH MNY923AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923BA MNY923BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923BB MNY923BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923BC MNY923BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923BG MNY923BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923BH MNY923BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
