Pargreen Process Technologies - Memtrex™ MP Pleated Filters with Polyethersulfone Membrane

Memtrex MP (MMP) filters (Figure 1), constructed with hydrophilic polyethersulfone membranes and all polypropylene components, exhibit both enhanced throughput and reliable particle retention for superior performance in most applications. MMP filters are compatible with a broad range of chemicals and pH extremes. The low protein binding characteristics of the polyethersulfone membranes ensure that MMP filters are suitable in a variety of beverage, chemical and pharmaceutical applications. Constructed using thermal welding techniques, the MMP filters do not contain any adhesives or additives, and individual integrity testing assures that MMP filters meet the exacting performance requirements of our customers.

The MMP filter is just one example of our dedicated commitment to fluid filtration. Our extensive portfolio includes filters for every stage of processing, and we can offer custom solutions for your unique applications. GE Water & Process Technologies is your complete source for filters, housings, and other filtration equipment.

Request Information

Unit of Measure

Items	MMP911AA Memtrex™ MP Pleated Filters with Polyethersulfone Membrane	MMP911AB Memtrex™ MP Pleated Filters with Polyethersulfone Membrane	MMP911AC Memtrex™ MP Pleated Filters with Polyethersulfone Membrane	MMP911AG Memtrex™ MP Pleated Filters with Polyethersulfone Membrane	MMP911AH Memtrex™ MP Pleated Filters with Polyethersulfone Membrane
Absolute Micron Rating	N/A 0.1 µm
Nominal Cartridge Length	N/A 10 in25 cm
End #1 Adapter¹	N/A Open End Gasket
End #2 Adapter	N/A Open End Gasket	N/A 120 O-Ring	N/A 213 O-Ring	N/A Closed End Cap	N/A Fin Adapter
Elastomer Material²	N/A Buna-N EPDM Silicone Viton
Filtration Media	N/A Hydrophilic Polyethersulfone Membrane
Support Layers	N/A Polypropylene Microfiber
Core and Cage	N/A Polypropylene
Endcaps and Adapters	N/A Polypropylene
Nominal Outside Diameter	N/A 2.75 in70 mm
Nominal Inside Diameter	N/A 1.25 in31 mm
Effective Filtration Area	N/A 8 ft²1 m²
Maximum Forward Differential Pressure @ 70ºF (21ºC)	N/A 60 psid4.2 bar
Maximum Reverse Differential Pressure @ 70ºF (21ºC)	N/A 30 psid2.1 bar
Maximum Operating Temperature at 10 psid (0.7 bar) in Water	N/A 180 ºF82 ºC
Integrity Testing³	N/A ≤ 45 cc/min at 50 psig≤ 45 cc/min at 3.4 bar
Note	N/A Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications	N/A MMP filters are suitable for a broad range of applications, including filtration of: Inks and dyes Acids, bases, and oxidants Process water Pharmaceutical preparations Serums and tissue culture media
General Properties	N/A Memtrex MP filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.
Additional Information	N/A Memtrex MP filters may be autoclaved or in situ steam sterilized (up to 257ºF [125ºC], 30-minute cycles) for a maximum accumulated exposure of 10 hours. Filters which are steam sterilized must have stainless steel insert supported o-ring adaptors. Alternatively, the filters may be sanitized with compatible chemical agents. GE certifies that the material contained in its Memtrex MP pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex MP filters meet the test criteria for USP class VI-121ºC Plastics Aqueous extracts from Memtrex MP filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
¹ 222 O-Ring Stainless Steel Support Ring & 226 O-Ring Stainless Steel Support Ring Adapters normally require Closed End Cap & Fin Adapters. ² PTFE and Viton ore registered trademarks of DuPont. ³ Air diffusion per 10" module after saturation with clean water