Industry’s Filtration Partner
Hydrophilic PES membrane cartridges for aqueous applications

Clariflow®-E cartridges are optimized for use in microelectronics applications such as DI water and aqueous-based chemicals. The unique mirrored anisotropic PES (Polyethersulfone) membrane has exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates.

The combination of hydrophilic PES membrane and a high-purity, all-polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle shedding.

Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure DI water, and 100% integrity tested in an ISO-certified facility.
Unit of Measure

Specifications

Filter Rating

N/A 0.02 µm0.04 µm0.10 µm0.2 µm0.45 µm0.65 µm0.8 µm

Insert Style

N/A None (STD)

End Fittings

N/A 120/Internal/Recessed Endcap

Nominal Length

N/A 10 in250 mm

Gasket/O-Ring Material

N/A Buna N EPDM FEP Encapsulated Silicone (O-Rings only) FEP Encapsulated Viton (O-Rings only) None Silicone Viton®

Thickness (Gaskets only)

N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket

Effective Filtration Area per 10 inch (250 mm) Cartridge

N/A 6.8 ft²0.63 m²

Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)

N/A 80 psid5.5 bar

Maximum Forward Differential Pressure/Temperature @ 180ºF (82ºC)

N/A 40 psid2.8 bar

Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)

N/A 50 psid3.4 bar

Cleanliness (Particle Shedding)

N/A Dry-packed: < 1 particles/ml > 0.2µm after 6gal at 1gpm
Data as from open bag and installed, no additional installation flushing.

Resistivity Rinse-Up

N/A Resistivity rinse-up to background minus 0.2megohm-cm of feed after 20gal @ 1gpm.
Typical Water Flow Rates1 N/A 0.02 µm - 0.5 gpm/psid (2.75 lpm/100mbar) 0.04 µm - 1.0 gpm/psid (5.49 lpm/100mbar) 0.10 µm - 1.8 gpm/psid (9.88 lpm/100mbar) 0.20 µm - 3.7 gpm/psid (20.31 lpm/100mbar) 0.45 µm - 4.8 gpm/psid (26.35 lpm/100mbar) 0.65 µm - 8.9 gpm/psid (48.86 lpm/100mbar) 0.80 µm - 9.5 gpm/psid (52.16 lpm/100mbar)

Materials of Construction

Membrane

N/A Polyethersulfone

Support Layers

N/A Polypropylene

Structure

N/A Polypropylene

Benefits

N/A

  • High-retention hydrophilic membrane
  • High flow rate
  • Broad chemical compatibility for multiple applications
  • Long on-stream life
  • 100% integrity tested

  • Applications

    N/A

  • BOE
  • Dilute HF
  • POU DI rinse
  • Bulk DI water systems
  • Copper plating
  • Ni plating
  • Hard disk wash processes
  • Other dilute acids and bases

  • Technical Support and Product Information

    N/A Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.

    Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.

    Note

    N/A Specifications are subject to change without notification.
    Clariflow is a registered trademark of Parker Hannifin Corporation.
    Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
    Cuno is a registered trademark of Cuno Inc.

    • 1 Per 10-inch (250 mm) cartridge equivalent.