The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Specifications
Filter Rating |
N/A 0.03 µm0.05 µm0.10 µm0.2 µm0.45 µm1 µm |
Treatment Application |
N/A Extended Flushed with 18 Megohm DI Water |
Insert Style |
N/A 1/2" Shortened on 222 Fitting |
End Fittings |
N/A DOE |
Nominal Length |
N/A 30 in750 mm |
Gasket/O-Ring Material |
N/A Buna N EPDM FEP-Encapsulated Silicone (O-Rings only) FEP-Encapsulated Viton (O-Rings only) None Silicone Viton® |
Thickness (Gaskets only) |
N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket |
Treatment Options |
N/A Standard Wet Packed |
Effective Filtration Area per 5 inch (130 mm) Cartridge |
N/A 4.6 ft²0.43 m² |
Effective Filtration Area per 10 inch (250 mm) Cartridge |
N/A 9.3 ft²0.86 m² |
Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC) |
N/A 80 psid5.5 bar |
Maximum Forward Differential Pressure/Temperature @ 180ºF (82ºC) |
N/A 40 psid2.8 bar |
Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC) |
N/A 50 psid3.4 bar |
Cleanliness (Particle Shedding) |
N/A
Wet-packed: < 1 particles/ml > 0.2µm after 6gal at 1gpm Data as from open bag and installed, no additional installation flushing. |
Typical Water Flow Rates1 | N/A 0.03 µm - 0.6 gpm/psid (3.31 lpm/100 mbar) 0.05 µm - 0.8 gpm/psid (4.39 lpm/100 mbar) 0.10 µm - 1 .7 gpm/psid (9.33 lpm/100 mbar) 0.20 µm - 3.2 gpm/psid (17.5 lpm/100 mbar) 0.45 µm - 7.6 gpm/psid (41.72 lpm/100 mbar) 1.00 µm - 9.1 gpm/psid (49.97 lpm/100 mbar) |
Materials of Construction
Membrane |
N/A PTFE |
Support Layers |
N/A Polypropylene |
Structure |
N/A Polypropylene |
TOC/Resistivity Rinse-Up (Wet-Packed)
N/A TOC rinse-up to background plus 5ppb of feed after 70gal @ 1gpm. Resistivity rinse-up to background minus 0.2megohm-cm of feed after 30gal @ 1gpm.. |
Benefits
N/A
|
Applications
N/A
|
Technical Support and Product Information
N/A
Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office. |
- 1 Per 10-inch (250mm) cartridge equivalent.