Industry’s Filtration Partner
Hydrophobic PTFE membrane for general purpose gas and solvent purification

Proflow™ II-G cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5.6 square feet of expanded PTFE membrane, Proflow II-G is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents.

Proflow™ II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality.
Unit of Measure

Specifications

Filter Rating

N/A 0.05 µm0.10 µm0.2 µm0.45 µm1 µm

Treatment Application

N/A Standard

Insert Style

N/A No Insert

End Fittings

N/A DOE (CUNO®)

Nominal Length

N/A 10 in250 mm

Gasket/O-Ring Material

N/A Buna N EPDM FEP-Encapsulated Silicone (O-Rings only) FEP-Encapsulated Viton (O-Rings only) None Silicone Viton®

Thickness (Gaskets only)

N/A 0.125" (3 mm) 0.200" (5 mm) (1) 0.200" (5 mm) & (1) 0.125" (3 mm) No Gasket

Effective Filtration Area per 10 inch (250 mm) Cartridge

N/A 5.6 ft²0.52 m²

Maximum Forward Differential Pressure/Temperature @ 75ºF (24ºC)

N/A 80 psid5.5 bar

Maximum Forward Differential Pressure/Temperature @ 180ºF (82ºC)

N/A 40 psid2.8 bar

Maximum Reverse Differential Pressure/Temperature @ 75ºF (24ºC)

N/A 50 psid3.4 bar

Cleanliness (Particle Shedding)

N/A Wet-packed: < 1 particles/ml > 0.2µm after 6gal at 1gpm
Data as from open bag and installed, no additional installation flushing.
Typical Water Flow Rates1 N/A 0.05 µm - 0.6 gpm/psid (3.29 lpm/100 mbar) 0.10 µm - 1.2 gpm/psid (6.59 lpm/100 mbar) 0.20 µm - 2.5 gpm/psid (13.73 lpm/100 mbar) 0.45 µm - 5.1 gpm/psid (28.00 lpm/100 mbar) 1.00 µm - 6.2 gpm/psid (34.04 lpm/100 mbar)

Materials of Construction

Membrane

N/A PTFE

Support Layers

N/A Polypropylene

Structure

N/A Polypropylene

TOC/Resistivity Rinse-Up (Wet-Packed)

N/A TOC rinse-up to background plus 5ppb of feed after 70gal @ 1gpm. Resistivity rinse-up to background minus 0.2megohm-cm of feed after 30gal @ 1gpm.

Benefits

N/A

  • Reliable air and liquid flow rates for effective performance
  • Broad chemical compatibility enables use in many applications
  • Broad range of micron ratings for user convenience
  • Superior hydrophobicity for long life in vent/air applications
  • Integrity tested to ensure quality

  • Applications

    N/A

  • Photoresists
  • Compressed gas
  • Non-sterile venting
  • Electronic grade solvents
  • Hot deionized water (less than 80ºC)

  • Technical Support and Product Information

    N/A Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.

    Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.

    Note

    N/A Specifications are subject to change without notification.
    Polyflow is a registered trademark of Parker Hannifin Corporation.
    Viton is a registered trademarks of E.I. DuPont de Nemours & Co., Inc.
    Cuno is a registered trademarks of Cuno, Inc.

    • 1 Per 10-inch (250 mm) cartridge equivalent.