Industry’s Filtration Partner
The P-Series family of polyethersulfone ultrafiltration membrane elements are characterized by a 10,000 molecular weight cut-off and greater than 96% rejection of Cytochrome-C (13,300 MW protein). PW Elements are used for pretreatment of process water and post treatment of ultrapure water.
Unit of Measure

Element Specification


N/A P-Series, Polyethersulfone

Active Area

N/A 85 ft²7.9 m²

Outer Wrap

N/A Fiberglass

Part Number

N/A 1207376

Dimensions and Weight

Dimension A (Length)

N/A 40.0 in101.6 cm
Dimension B1 N/A 0.625 in1.59 cm

Dimension C (Outside Diameter)

N/A 3.9 in9.9 cm

Boxed Weight

N/A 8 lb3.5 kg

Operating and CIP parameters

Typical Operating Pressure

N/A 80 - 135 psig555 - 931 kPa

Typical Operating Flux

N/A 10 - 25 GFD15 - 40 LMH

Maximum Pressure

N/A 200 psig1379 kPa

Maximum Operating Temperature

N/A 122 ºF50 ºC

Maximum Cleaning Temperature

N/A 122 ºF50 ºC

Operating Range Recommended pH

N/A 4.0 - 11.0

Cleaning Range Recommended pH

N/A 2.0 - 11.5

Recommended Pressure Drop Over an Element

N/A 12 psig83 kPa

Recommended Pressure Drop Per Housing

N/A 50 psig345 kPa

Chlorine Tolerance

N/A 5,000+ ppm-days


N/A This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries

  • 1 Internal diameter unless specified OD (outside diameter).