Industry’s Filtration Partner
Memtrex PC (MPC) filters’ (Figure 1) unique polycarbonate track-etch membrane leads the market for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems. MPC filters’ precise micron cutoffs and very low pore sizes down to 0.05 micron provide you with high purity filtration for all of your critical electronic, chemical and highly technical processes.

The MPC filter is just one example of our strong commitment to fluid filtration.more
Unit of Measure

Specifications

Type

 MPC

Absolute Micron Rating

 0.05 µm

Nominal Cartridge Length

 10 in25 cm

End #1 Adapter

 213 O-Ring

End #2 Adapter

 Closed End Cap
Elastomer Material1 Buna-N EPDM Silicone Viton

Note

 Trademark of General Electric Company; may be registered in one or more countries.

Materials of Construction

Media Material

 Polycarbonate Track-etch Membrane

Support Layers

 Polypropylene Microfiber

Core and Cage

 Polypropylene

Endcaps and Adapters

 Polypropylene

Dimensions

Nominal Outside Diameter

 2.75 in70 mm

Nominal Inside Diameter

 1.25 in31 mm

Effective Filtration Area

 17 ft²2 m²

Operational Limits

Maximum Forward Differential Pressure @ 70ºF (21ºC)

 60 psi4.1 bar

Maximum Reverse Differential Pressure @ 70ºF (21ºC)

 30 psi2.07 bar

Maximum Operating Temperature at 10 psid (0.69 bar) in Water

 180 ºF82 ºC

Typical Applications

N/A Memtrex PC filters are specifically designed for ultrapure filtration. Typical applications include:

  • Pure Chemical Filtration
  • Inks and Dyes
  • Ultrapure Water Filtration
  • Plating Solutions

    • General Properties

    N/A Memtrex PC filters are available the following absolute pore size micron rating: 0.05, 0.1, 0.2 and 0.45 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.

    Additional Information

    N/A

    • The filters may be sanitized with compatible chemical agents.
    • Memtrex PC filters meet the test criteria for USP class VI-121ºC plastics.
    • Aqueous extracts from Memtrex PC filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
    • GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

    • 1 PTFE and Viton are registered trademarks of DuPont.