Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY964JA MNY964JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964JB MNY964JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964JC MNY964JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964JG MNY964JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964JH MNY964JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964QA MNY964QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964QB MNY964QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964QC MNY964QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964QG MNY964QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964QH MNY964QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964ZA MNY964ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964ZB MNY964ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964ZC MNY964ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964ZG MNY964ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY964ZH MNY964ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.65 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 12 psig≤ 50 cc/min at 0.83 bar |
| MNY011AA MNY011AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011AB MNY011AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011AC MNY011AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011AG MNY011AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011AH MNY011AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011BA MNY011BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011BB MNY011BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011BC MNY011BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011BG MNY011BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011BH MNY011BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
