Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY011ZA MNY011ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011ZB MNY011ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011ZC MNY011ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011ZG MNY011ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY011ZH MNY011ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012AA MNY012AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012AB MNY012AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012AC MNY012AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012AG MNY012AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012AH MNY012AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012BA MNY012BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012BB MNY012BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012BC MNY012BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012BG MNY012BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012BH MNY012BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012CA MNY012CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012CB MNY012CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012CC MNY012CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012CG MNY012CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012CH MNY012CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012EA MNY012EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012EB MNY012EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012EC MNY012EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012EG MNY012EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY012EH MNY012EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
