Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY013QA MNY013QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013QB MNY013QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013QC MNY013QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013QG MNY013QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013QH MNY013QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013ZA MNY013ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013ZB MNY013ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013ZC MNY013ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013ZG MNY013ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY013ZH MNY013ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014AA MNY014AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014AB MNY014AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014AC MNY014AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014AG MNY014AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014AH MNY014AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014BA MNY014BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014BB MNY014BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014BC MNY014BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014BG MNY014BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014BH MNY014BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014CA MNY014CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014CB MNY014CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014CC MNY014CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014CG MNY014CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
| MNY014CH MNY014CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 1.0 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 5 psig≤ 50 cc/min at 0.34 bar |
