Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY923CA MNY923CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923CB MNY923CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923CC MNY923CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923CG MNY923CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923CH MNY923CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923EA MNY923EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923EB MNY923EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923EC MNY923EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923EG MNY923EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923EH MNY923EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923FA MNY923FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923FB MNY923FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923FC MNY923FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923FG MNY923FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923FH MNY923FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923JA MNY923JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923JB MNY923JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923JC MNY923JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923JG MNY923JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923JH MNY923JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923QA MNY923QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923QB MNY923QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923QC MNY923QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923QG MNY923QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY923QH MNY923QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
