Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY924FA MNY924FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924FB MNY924FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924FC MNY924FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924FG MNY924FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924FH MNY924FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924JA MNY924JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924JB MNY924JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924JC MNY924JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924JG MNY924JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924JH MNY924JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924QA MNY924QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924QB MNY924QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924QC MNY924QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924QG MNY924QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924QH MNY924QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924ZA MNY924ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924ZB MNY924ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924ZC MNY924ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924ZG MNY924ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY924ZH MNY924ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.2 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 30 psig≤ 50 cc/min at 2.07 bar |
| MNY941AA MNY941AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941AB MNY941AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941AC MNY941AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941AG MNY941AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941AH MNY941AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
