Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY941QA MNY941QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941QB MNY941QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941QC MNY941QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941QG MNY941QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941QH MNY941QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941ZA MNY941ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941ZB MNY941ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941ZC MNY941ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941ZG MNY941ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY941ZH MNY941ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 10 in25.4 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942AA MNY942AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942AB MNY942AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942AC MNY942AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942AG MNY942AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942AH MNY942AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942BA MNY942BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942BB MNY942BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942BC MNY942BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942BG MNY942BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942BH MNY942BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942CA MNY942CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942CB MNY942CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942CC MNY942CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942CG MNY942CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY942CH MNY942CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
