Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY943AA MNY943AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943AB MNY943AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943AC MNY943AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943AG MNY943AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943AH MNY943AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943BA MNY943BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943BB MNY943BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943BC MNY943BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943BG MNY943BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943BH MNY943BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943CA MNY943CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943CB MNY943CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943CC MNY943CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943CG MNY943CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943CH MNY943CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943EA MNY943EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943EB MNY943EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943EC MNY943EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943EG MNY943EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943EH MNY943EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943FA MNY943FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943FB MNY943FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943FC MNY943FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943FG MNY943FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
| MNY943FH MNY943FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.45 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 15 psig≤ 50 cc/min at 1.03 bar |
