Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY912CA MNY912CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912CB MNY912CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912CC MNY912CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912CG MNY912CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912CH MNY912CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912EA MNY912EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912EB MNY912EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912EC MNY912EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912EG MNY912EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912EH MNY912EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912FA MNY912FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912FB MNY912FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912FC MNY912FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912FG MNY912FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912FH MNY912FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912JA MNY912JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912JB MNY912JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912JC MNY912JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912JG MNY912JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912JH MNY912JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912QA MNY912QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912QB MNY912QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912QC MNY912QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912QG MNY912QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912QH MNY912QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
