Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY912ZA MNY912ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912ZB MNY912ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912ZC MNY912ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912ZG MNY912ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY912ZH MNY912ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 20 in50.8 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913AA MNY913AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913AB MNY913AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913AC MNY913AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913AG MNY913AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913AH MNY913AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913BA MNY913BA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913BB MNY913BB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913BC MNY913BC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913BG MNY913BG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913BH MNY913BH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 120 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913CA MNY913CA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913CB MNY913CB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913CC MNY913CC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913CG MNY913CG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913CH MNY913CH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 213 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913EA MNY913EA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913EB MNY913EB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913EC MNY913EC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913EG MNY913EG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913EH MNY913EH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
