Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
GE Membrane Filters
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.
Item # |
Type |
Micron Rating |
Nominal Cartridge Length |
End #1 Adapter |
End #2 Adapter |
Integrity Testing |
|---|---|---|---|---|---|---|
| MNY913FA MNY913FA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913FB MNY913FB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913FC MNY913FC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913FG MNY913FG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913FH MNY913FH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913JA MNY913JA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913JB MNY913JB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913JC MNY913JC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913JG MNY913JG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913JH MNY913JH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 020 O-Ring | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913QA MNY913QA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913QB MNY913QB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913QC MNY913QC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913QG MNY913QG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913QH MNY913QH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 222 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913ZA MNY913ZA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913ZB MNY913ZB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913ZC MNY913ZC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913ZG MNY913ZG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY913ZH MNY913ZH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 30 in76 cm | End #1 Adapter N/A 226 O-Ring Stainless Steel Insert | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY914AA MNY914AA/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Open End Gasket | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY914AB MNY914AB/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 120 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY914AC MNY914AC/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A 213 O-Ring | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY914AG MNY914AG/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Closed End Cap | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
| MNY914AH MNY914AH/Asset/62-1.jpg | Type N/A MNY | Micron Rating N/A 0.1 µm | Nominal Cartridge Length N/A 40 in101.5 cm | End #1 Adapter N/A Open End Gasket | End #2 Adapter N/A Fin Adapter | Integrity Testing N/A ≤ 50 cc/min at 40 psig≤ 50 cc/min at 2.76 bar |
