Clariflow®-E Cartridges
Parker Membrane Filters
Hydrophilic PES membrane cartridges for aqueous applications
Clariflow®-E cartridges are optimized for use in microelectronics applications such as DI water and aqueous-based chemicals. The unique mirrored anisotropic PES (Polyethersulfone) membrane has exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates.
The combination of hydrophilic PES membrane and a high-purity, all-polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle shedding.
Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure DI water, and 100% integrity tested in an ISO-certified facility.
Clariflow®-E cartridges are optimized for use in microelectronics applications such as DI water and aqueous-based chemicals. The unique mirrored anisotropic PES (Polyethersulfone) membrane has exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates.
The combination of hydrophilic PES membrane and a high-purity, all-polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle shedding.
Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure DI water, and 100% integrity tested in an ISO-certified facility.
Item # |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
Structure |
---|---|---|---|---|---|---|
25-50H20 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50R20 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60020 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60120 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A DOE | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60620 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60G20 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60H20 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-60R20 | Insert Style N/A Encapsulated Polysulfone | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0020 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0120 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0620 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0G20 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0H20 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-A0R20 | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10030 | Insert Style N/A None (STD) | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10130 | Insert Style N/A None (STD) | End Fittings N/A DOE | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10630 | Insert Style N/A None (STD) | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10G30 | Insert Style N/A None (STD) | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10H30 | Insert Style N/A None (STD) | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-10R30 | Insert Style N/A None (STD) | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50030 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50130 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A DOE | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50630 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50G30 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |
25-50H30 | Insert Style N/A Encapsulated 316L Stainless Steel | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A Polyethersulfone | Support Layers N/A Polypropylene | Structure N/A Polypropylene |