Proflow™ II-E Filter Cartridges
Parker Membrane Filters
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Item # |
Treatment Application |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
---|---|---|---|---|---|---|
36-A0G05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G20 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G30 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G40 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10H05 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10H10 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10H20 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10H30 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10H40 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50H05 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50H10 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50H20 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50H30 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50H40 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H05 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H10 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H20 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H30 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60H40 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H05 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H10 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H20 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H30 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-A0H40 | Treatment Application N/A Standard | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |